Installation Procedure
- Install the console storage bin to the console.
- Refer to FASTENER NOTICE
in Cautions and Notices.
Install the 2 retaining bin screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
- Install the rear cupholder by pushing the unit in until the cupholder locks into place.
- Install the 4 bolts retaining the console to the bracket.
Tighten
Tighten the bolts to 2 N.m (18 lb in).
- Install the bin screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
- Close the console.