LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Engine Oil Pressure Sensor or Switch Replacement (6.6L) >> Removal Procedure

Removal Procedure

  1. Raise and suitable support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. IMPORTANT:

    Clean the area around the sensor. Do not allow debris to enter the engine.

    Fig 1: View Of Engine Oil Pressure Sensor
    GM675758Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the engine oil pressure sensor electrical connector.
  3. Remove the engine oil pressure sensor using the J 41712 .
scientia non olet · About LEMON Manuals