Removal Procedure
- Remove both front seats. Refer to Front Seat Removal and Installation - Bucket
in Seats.
- Remove the console bezel. Refer to Floor Console Bezel Replacement (Luxury) .
Courtesy of GENERAL MOTORS COMPANY
- Remove the two bolts (1) attaching the floor console to the front extension.
- Remove the bolt (2) attaching the floor console to the subwoofer box, if equipped.
- Lift up the console assembly from the floor studs and move rearwards to gain access to the wire harness connector.
- Disconnect the wire connector.
- Remove the console assembly (3) from the vehicle.