Installation Procedure
- Place the console assembly in the vehicle in other to connect the wire connector.
- Connect the wire connector.
- Install the console over the studs.
- Refer to Fastener Notice
in Cautions and Notices.
Install the two front console bolts (1) to the front extension.
Tighten
Tighten the two bolts to 1.6 N.m (14 lb in).
- Install the bolt (2) to the subwoofer box, if equipped.
Tighten
Tighten the bolt to 1.6 N.m (14 lb in).
- Install the console bezel. Refer to Floor Console Bezel Replacement (Luxury) .
- Install both front seats. Refer to Front Seat Removal and Installation - Bucket in Seats.