Removal Procedure
- Remove the console bezel. Refer to Floor Console Bezel Replacement (Luxury) .
- Remove the driver information center (DIC). Refer to Driver Information Center Replacement .
- Remove the CD player. Refer to Remote Compact Disc Player Replacement .
- Remove the console bin.
- Remove the amplifier, if equipped. Refer to Radio Speaker Amplifier Replacement (Denali Yukon) , Radio Speaker Amplifier Replacement (Base) , Radio Speaker Amplifier Replacement (Denali Suburban) in Entertainment.
- Remove the bolts retaining the console to the mounting bracket.
- Remove the 2 bolts (1) retaining the console to the extension.
- Carefully lift the front of the console up and then rearwards.
- Disconnect any wire connections that prevents further rearward movement.
- Move the console rearwards in order to make room for the IP extension to be removed.
- Disconnect the wire connector to the extension.
- Remove the 4 screws (1) that retains the extension to the IP.
- Ensure all wires are disconnected from the extension.
- Remove the extension from the vehicle.
- Remove the speakers from the extension, if equipped.
- Remove the DIC and power outlet bracket from the extension.