Engine Oil Pressure Indicator Always On
Engine Oil Pressure Indicator Always On
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| Schematic Reference: Instrument Cluster Schematics | ||||
| 1 | Did you perform the Instrument Cluster Diagnostic System Check? | - | Go to Step 2 | Go to Diagnostic System Check - Instrument Cluster |
| 2 | Turn ON the ignition with the engine OFF. Does the engine oil pressure indicator display in the message center? |
- | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
| 3 |
|
0 psi (0 kPa) | Go to Engine Oil Pressure Gauge Inaccurate or Inoperative | Go to Step 4 |
| 4 | Replace the IPC. Refer to Instrument Cluster Replacement . Did you complete the replacement? |
- | Go to Step 5 | - |
| 5 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 3 |