Park Brake Shoe Inspection - Rear Drum
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the rear brake drum. See DRUM BRAKE SHOE under REMOVAL & INSTALLATION.
- Inspect and replace the brake shoe and lining if any of the following conditions are found:
- Excessive wear indicated by the brake lining being worn down to the shoe.
- Brake shoe lining cracking.
- Oil or fluid contamination.
- Adjust the park brake if necessary. See PARK BRAKE ADJUSTMENT .
- Install the rear brake drum. See DRUM BRAKE SHOE under REMOVAL & INSTALLATION.
- Lower the vehicle.