LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 451 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Steering Wheel >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See ZONE 3  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove driver-side air bag module. See AIR BAG MODULES . Scribe mark on steering shaft and steering wheel for use during installation. Remove steering wheel nut. Using Steering Wheel Puller (J-1859-A) with Puller Legs (J-42578), remove steering wheel.
  3. To install, reverse removal procedure. Tighten steering wheel nut to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ZONE 3  under DISABLING & ACTIVATING AIR BAG SYSTEM.
scientia non olet · About LEMON Manuals