Removal & Installation
WARNING: This page is about a different car, the 2002 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Disconnect negative battery cable.
- Remove IPC trim. Place a protective cloth on steering column to prevent scratches. Remove 4 IPC mounting bolts. Pull IPC out of instrument panel. Disconnect IPC electrical connector from rear of IPC.
- To install, reverse removal procedure. Tighten IPC mounting bolts to specification. See TORQUE SPECIFICATIONS . Activate air bag system.