LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> Jimmy 2D Utility, RWD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Axle Hub Bearings & Oil Seal (Full-Floating Axle) >> Removal

Rear Axle Hub Bearings & Oil Seal (Full-Floating Axle): Removal

  1. Remove rear hub and rotor assembly. See REAR BRAKE ROTOR . Using a long drift and hammer, drive out inner bearing race, inner bearing and oil seal from outboard to inboard side of hub.
  2. Remove retaining ring from inside of hub, inboard of outer bearing. Using handle and outer bearing race remover/installer, drive out outer bearing race from outboard to inboard side of hub.
scientia non olet · About LEMON Manuals