LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> Jimmy 2D Utility, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (Engine Mechanical (Repair Instructions 2 Of 5) - 3.6L (Ly7)) >> Repair Instructions (On-Vehicle Part 2 & Off-Vehicle Part 1) >> On-Vehicle Repair Instructions - Part 2 >> Crankshaft Rear Oil Seal and Housing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Rear Oil Seal And Housing
    GM902808Courtesy of GENERAL MOTORS CORP.
  1. Install the crankshaft rear oil seal and housing. Refer to Crankshaft Rear Oil Seal and Housing Installation .
  2. Install the oil pan. Refer to Oil Pan Replacement .
  3. Install the engine flywheel. Refer to Engine Flywheel Replacement .
scientia non olet · About LEMON Manuals