LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> C3500 HD 7.4 J, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle)) >> Repair Instructions >> Oil Level Indicator and Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the oil level indicator tube.
  2. Apply sealant around the oil level indicator tube 12.7 mm (0.50 in) below the bead. Use GM sealant P/N 12345493 (Canadian P/N 10953488) or the equivalent.
  3. Install the oil level indicator tube into the engine block.
  4. Install the oil level indicator tube bracket bolt.

    Tighten: 

    Tighten the bolt to 25 N.m (18 ft lbs) 

  5. Install the oil level indicator.
  6. Connect the spark plug wire to the number 6 cylinder spark plug.
scientia non olet · About LEMON Manuals