Installation Procedure
WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Position the right engine mount strut bracket over the pin locator.
- Install the bolts through the right engine mount strut bracket to the cylinder head.
Tighten:
Tighten the engine mount strut bracket bolt to 50 N.m (37 ft lbs)
- Install the air conditioner compressor. Refer to COMPRESSOR
.
Tighten:
Tighten the air conditioning compressor mounting bolts to 50 N.m (37 ft lbs)
- Install the right engine mount strut to the right engine mount strut bracket. Refer to Engine Mount Strut Replacement .