LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> C3500 HD 6.5 F, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical - 4.3L V6, 5.0L, 5.7L & 7.4L V8 - VINS [W,X,M,R,J]) >> Removal & Installation >> Oil Pan >> 4.3L "C" & "K" Series >> Installation

4.3L "C" & "K" Series: Installation

WARNING: This page does not describe the selected car, but rather 55 other vehicles, including the 1999 Oldsmobile Bravada, 1999 GMC Yukon, 1999 GMC Suburban, 1999 GMC Sonoma, and 1999 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Any time the transmission and the engine oil pan are off of the engine at the same time, install the transmission before the oil pan. This is to allow for the proper measurement of the oil pan tolerance. Failure to achieve the correct clearance can result in premature transmission failure.
  1. Install the engine oil pan and a NEW oil pan gasket.
  2. Install the engine flywheel.
  3. Install the transmission. Refer to REMOVAL & INSTALLATION ("C" & "K" SERIES) .
  4. Install the access plugs for the oil pan rear nuts.
  5. Install the oil cooler pipes and the retainer from the side of the engine.
  6. Install the oil filter adapter. Refer to OIL FILTER ADAPTER .
  7. Install the starter motor.
  8. Install the engine oil filter and the engine oil.
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals