LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1999 >> Yukon Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Analog >> System Tests >> Tachometer Test >> Tachometer Does Not Operate (Diesel)

Tachometer Does Not Operate (Diesel)

  1. Disconnect instrument cluster connector. Disconnect generator connector. Connect test light between generator connector terminal "A" (White wire) and ground. See WIRING DIAGRAMS . If test light does not illuminate, go to next step. If test light illuminates, repair short to ground in White wire between instrument cluster and generator.
  2. Connect test light between instrument cluster connector terminal No. 6 (White wire) and generator connector terminal "A" (White wire). See Figure. See WIRING DIAGRAMS . If test light illuminates, go to next step. If test light does not illuminate, repair open in White wire between instrument cluster and generator.
  3. Reconnect generator connector. Start engine. Connect voltmeter between instrument cluster connector terminal No. 6 (White wire) and ground. See WIRING DIAGRAMS . Check for pulsating voltage at or below 14 volts. If voltage is present, replace instrument cluster. If voltage is not present, replace generator.
scientia non olet · About LEMON Manuals