Pistons, Pins & Piston Rings (7.4L)
WARNING: This page is about a different variant/trim than selected.
PISTONS, PINS & RINGS (7.4L)
| Application | In. (mm) | ||
|---|---|---|---|
| Piston Clearance | .0018-.0048 (.046-.219) | ||
| Pin Diameter | .9895-.9897 (25.133-25.137) | ||
| Piston Fit | .0002-.0007 (.005-.017) | ||
| Rod Fit | .0021-.0031 (.053-.079) Interference | ||
| Rings | |||
| No. 1 | |||
| End Gap | .01-.018 (.254-.457) | ||
| Side Clearance | .0012-.0029 (.031-.074) | ||
| No. 2 | |||
| End Gap | .016-.024 (.406-.609) | ||
| Side Clearance | .001-.0029 (.025-.074) | ||
| No. 3 (Oil) | |||
| End Gap | .01-.03 (.254-.76) | ||
| Side Clearance | .005-.0065 (.127-.165) | ||