LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Yukon RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 415 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Proportioning Valve >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake pipes from the proportion valve.
  2. Remove Master Cylinder brake pipes from proportion valve.
  3. Remove the nuts that retain the proportion valve to the mounting bracket.
  4. Remove the proportion valve from the bracket.
  5. To install, place the proportion valve on bracket and install retaining nuts.
  6. Install master cylinder brake pipes to proportion valve.
  7. Install the brake pipes to the proportion valve.
  8. Bleed brake system. See BLEEDING, FILLING & FLUSHING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals