Stoplight Switch
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Improper stoplight switch adjustment may cause brake drag, heat buildup and excessive brake lining wear.
- Disconnect electrical connector from the stoplight switch. See Fig 1 .
- Rotate switch counterclockwise and remove switch from the switch retainer.
- Install switch to bracket by turning and pushing the switch until switch bottoms on brake pedal.
- Connect electrical connector to stoplight switch. Inspect stoplight for proper operation.
NOTE:
DO NOT depress brake pedal during stoplight switch installation. This will cause a drag condition on the brakes.