Diagnostic Aids
Check TCC brake switch for proper adjustment. Check VCM calibration for current update. Inspect wiring for poor connections at VCM and brake switch. Check for bent, backed out, deformed or damaged terminals. Check for weak terminal tension. Check for chafed wire that could short to bare metal or other wiring. Check for broken wire inside insulation. If diagnosing for intermittent short or open condition, move wiring harness while observing scan tool for value change. First diagnose and clear any engine and TP sensor DTCs that are present, then inspect for any transmission DTCs that may have reset. On diesel engines, if DTC P0717 and P0730 are both present, diagnose DTC P0717 first. Check customer driving habits, such as stop and go traffic or freeway driving.