Rear Disc Brake Pads: Removal
IMPORTANT:
Do not disconnect the brake hose from the caliper.
- Remove the caliper. Refer to REAR BRAKE CALIPER NOTE: Do not allow the brake components to hang from the flexible brake hoses. Damage to the brake hoses could result.
- Suspend the caliper with wire.
- Remove the brake pads from the caliper bracket.
- Inspect the caliper bracket boots for the following conditions
- Cuts
- Tears
- Deterioration
- Replace the bracket boots if damage exists.
- Inspect the piston boot for the following conditions:
- Cuts
- Tears
- Deterioration
- Replace the piston boot if damage exists. Refer to REAR BRAKE CALIPER OVERHAUL
- Inspect the caliper bolts for corrosion or damage. If corrosion exists, use new components (including bushings) when installing the caliper. Do not attempt to polish away the corrosion.