LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Jimmy 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 4.3L V6, 5.0L, 5.7L & 7.4L V8 - VINS [W,X,M,R,J] >> Removal & Installation >> Rear Crankshaft Oil Seal >> Removal

Rear Crankshaft Oil Seal: Removal

Release fuel system pressure. See FUEL PRESSURE RELEASE . Disconnect negative battery cable. Remove transmission, clutch (M/T) and flywheel. On A/T see appropriate TRANSMISSION REMOVAL & INSTALLATION article in TRANSMISSION SERVICING. On M/T see appropriate article in CLUTCHES. Pry seal from housing. See Figure.

NOTE: On 4.3L, 5.0L & 5.7L, DO NOT allow oil or any other lubricant to contact seal surface of oil seal.
scientia non olet · About LEMON Manuals