LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Jimmy 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 4.3L V6, 5.0L, 5.7L & 7.4L V8 - VINS [W,X,M,R,J] >> Removal & Installation >> Oil Pan >> Installation (7.4L)

Installation (7.4L)

Apply a 13/64" (5 mm) bead of RTV (12346141) or equivalent to front cover/block joint and a 1" (25 mm) bead in both directions from each of the 4 corners. Install NEW oil pan gasket. Install oil pan and tighten bolts to specification. See TORQUE SPECIFICATIONS  table. To complete installation, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS  table.

scientia non olet · About LEMON Manuals