LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Jimmy 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 4.3L V6, 5.0L, 5.7L & 7.4L V8 - VINS [W,X,M,R,J] >> Removal & Installation >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

  1. Remove negative battery cable. Remove interior engine cover (if equipped). Remove upper and lower fan shrouds. Remove engine cooling fan. Remove crankshaft balancer bolt.
  2. Remove accessory drive belt(s) and water pump pulley. Remove crankshaft pulley bolts and remove pulley from balancer. Using Damper Puller/Installer (J-23523-F), remove crankshaft balancer. Carefully pry seal from front cover.
scientia non olet · About LEMON Manuals