LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Envoy >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Testing - Diagnostic >> DTC B1367: IPC Ignition 0 Circuit Low >> Testing

DTC B1367: IPC Ignition 0 Circuit Low: Testing

  1. Perform INSTRUMENT PANEL CLUSTER (IPC) SYSTEM CHECK  under SYSTEM TESTING. Go to next step.
  2. Disconnect IPC. Check for intermittent connection, open or short to ground on Pink wire between IPC terminal A8 and instrument panel fuse block terminal L5. If problem was found, repair Pink wire between IPC terminal A8 and instrument panel fuse block terminal L5. Go to next step. If no problem was found, go to next step.
  3. Clear DTCs. Perform INSTRUMENT PANEL CLUSTER (IPC) SYSTEM CHECK  under SYSTEM TESTING.
scientia non olet · About LEMON Manuals