Fuel Gauge Does Not Change Position On Scale (Dual Tanks)
- Turn ignition on. Disconnect fuel pump balance module connector. Connect test light between fuel pump balance module connector (connector C1 on gasoline) terminal "A" (Pink wire) and ground. See WIRING DIAGRAMS . If test light illuminates, go to next step. If test light does not illuminate, repair open in Pink wire between fuel pump balance module and underhood fuse/relay center located on rear of left inner fender panel.
- Connect test light between fuel pump balance module connector (connector C1 on gasoline) terminal "E" (Black/White wire) and ground. See WIRING DIAGRAMS . If test light illuminates, replace fuel pump balance module. If test light does not illuminate, repair open in Black/White wire between fuel pump balance module and ground connection.