Circuit Description
WARNING: This page is about a different variant/trim than selected.
Injection pump fuel supply line has a solenoid controlled shutoff located in injection pump. When solenoid is energized, valve is open and fuel is supplied to injection pump. PCM energizes solenoid by providing a ground path.
DTC will set when the following conditions are present:
- PCM requested engine shutoff solenoid on.
- Control circuit voltage at PCM is greater than 8 volts.
- Conditions are met for 2 seconds.
Or
- PCM requested engine shutoff solenoid off.
- Control circuit voltage at PCM is less than 8 volts.
- Conditions are met for 2 seconds.