Circuit Description
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1997 GMC Savana Special, 1997 GMC Savana Camper Special, 1997 GMC Savana, 1997 Chevrolet RV Cutaway, and 1997 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
VCM utilizes knock sensors to detect engine detonation, allowing VCM to retard Ignition Control (IC) spark timing based on knock sensor signal received. Knock Sensor (KS) circuitry within sensor pulls down VCM-supplied 5-volt DC signal, so that under a no-knock condition signal on KS, circuit measures about 1.3 volts. Sensor produces an AC signal that rides on DC signal. Signal amplitude and frequency are dependent upon amount of knock experienced.
VCM contains a replaceable KS module. KS module contains circuitry that allows VCM to utilize KS signal and diagnose knock sensors and circuitry. VCM will set DTC if KS module is missing or faulty causing a continuous knock condition.