LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1997 >> Forward Control 4.3 W, L35, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls - Tests W/Codes - 5.0L - G Vans) >> Diagnostic Trouble Codes >> DTC P1406 - EGR Valve Pintle Position Circuit >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 1997 GMC Savana, 1997 Chevrolet Chevy Van, and 1997 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.

An intermittent may be caused by a poor connection, rubbed-through wire insulation or a broken wire inside insulation. Inspect VCM harness connectors for backed-out terminals, improper mating, broken locks, improperly formed or damaged terminals, poor terminal-to-wire connection, and damaged harness.

If connections and harness are okay, using DVOM connected between affected terminals and ground, monitor voltage while wiggling related connectors and wiring harness. If a failure is induced, voltage will change. A change in voltage will assist in isolating location of fault.