LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1997 >> C3500 HD 7.4 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine Mechanical - 4.3L V6 - VIN W & ,X) >> Removal & Installation >> Front Cover Oil Seal >> Installation

Front Cover Oil Seal: Installation

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 1997 Oldsmobile Bravada, 1997 GMC Sonoma, 1997 GMC Savana, 1997 GMC Safari, and 1997 GMC Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Coat crankshaft front cover oil seal lips with clean engine oil. Using Seal Installer (J-35468), install NEW seal in front cover with seal lip facing engine. Apply RTV sealant to Woodruff keyway in crankshaft balancer.
  2. Using Damper Puller/Installer (J-23523-F), install crankshaft balancer. Tighten fasteners to specification. See TORQUE SPECIFICATIONS  table. To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals