LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1997 >> C3500 HD 7.4 J, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Engine Mechanical - 5.0L V8 - VIN [M]) >> Removal & Installation >> Oil Pan >> Installation

Oil Pan: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1997 GMC Savana, 1997 GMC Pickup, 1997 Chevrolet Pickup, 1997 Chevrolet Chevy Van, and 1997 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If transmission and oil pans are removed at same time. Transmission pan must be installed before oil pan.
  1. Apply RTV sealant to front cover-to-cylinder block junction and rear main bearing-to-cylinder block junction.
  2. Install oil pan. Tighten oil pan bolts to specification. See TORQUE SPECIFICATIONS  table. To complete installation, reverse removal procedure. Fill crankcase.
scientia non olet · About LEMON Manuals