Removal ("T" Series Pickup, Jimmy & Sonoma 4WD)
WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 1997 Oldsmobile Bravada, 1997 GMC Sonoma, 1997 GMC Savana, 1997 GMC Safari, and 1997 GMC Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect battery. Remove engine oil dipstick and accessory drive belt splash shield. Raise and support vehicle. Drain crankcase. Remove front axle shield and transfer case shield. Remove brake line clips from crossmember.
- Remove second crossmember. Remove converter hanger bolts and exhaust pipe clamp from converter. Disconnect exhaust pipes from manifolds. Slide exhaust pipe rearward. Disconnect front drive shaft from differential.
- Remove flywheel cover. Remove starter motor. Remove idler arm-to-frame bolts. Remove differential housing mounting bolts from bracket (right side) and frame (left side).
- Move differential housing forward. Remove front engine mount through-bolts. Raise and support engine. Remove oil pan bolts, oil pan and gasket.