LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1997 >> C3500 HD 6.5 F, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine Mechanical - 4.3L V6 - VIN W & ,X) >> Overhaul >> Cylinder Block Assembly >> Fitting Pistons

Fitting Pistons

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 1997 Oldsmobile Bravada, 1997 GMC Sonoma, 1997 GMC Savana, 1997 GMC Safari, and 1997 GMC Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure piston diameter at 90-degree angle to piston pin, on piston pin center line. Measure cylinder bore diameter 2 1/2" below cylinder block deck. Determine piston clearance.
  2. If piston clearance is not within specification, replace piston and/or machine cylinder bore as necessary. See CYLINDER BLOCK  and PISTONS, PINS & RINGS  tables under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals