Removal & Installation
WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 1997 Oldsmobile Bravada, 1997 GMC Sonoma, 1997 GMC Savana, 1997 GMC Safari, and 1997 GMC Pickup. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
On models equipped with press in rocker arm studs, ream stud bore before installing oversize rocker arm stud, or cylinder head may be damaged.
Unscrew rocker arm stud from cylinder head. To install, insert NEW rocker arm stud. Tighten to 35 ft. lbs. (47 N.m).