LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1996 >> C3500 HD 7.4 J, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Mechanical - 4.3L V6 - VIN W & ,X) >> Removal & Installation >> Front Cover >> Installation

Front Cover: Installation

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 1997 Oldsmobile Bravada, 1997 GMC Sonoma, 1997 GMC Savana, 1997 GMC Safari, and 1997 GMC Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install NEW front cover and gasket. Tighten front cover bolts to specification. See TORQUE SPECIFICATIONS .
    2. CAUTION: Ensure CKP sensor is fully seated and held stationary in bore of front cover upon installation. A CKP sensor that is not fully seated may result in erratic engine operation.
  2. Install CKP sensor. Tighten CKP sensor holddown bolt to specification. See TORQUE SPECIFICATIONS .
  3. Apply RTV sealant to Woodruff keyway in crankshaft damper. Install crankshaft damper using Damper Puller/Installer (J-23523-F). Tighten fasteners to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals