Removal & Installation: Engine: Notes

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 1997 Oldsmobile Bravada, 1997 GMC Sonoma, 1997 GMC Savana, 1997 GMC Safari, and 1997 GMC Pickup. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Minimal clearance exists between oil pump pick-up tube and bottom of oil pan. DO NOT place jack under oil pan, crankshaft pulley or any sheet metal when lifting engine.

WARNING: Provide addition support for opposite end from which components are being removed. When removing major components of vehicle, vehicle frame should be chained to hoist pads at same end as removed components to prevent tip-off. Failure to follow these precautionary measures could result in vehicle damage or serious personal injury.

NOTE: Flush out oil and engine cooling system when installing new engine.