LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1996 >> C3500 HD 7.4 J, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Mechanical - 4.3L V6 - VIN W & ,X) >> Engine Specifications >> Cylinder Block Specifications

Cylinder Block Specifications

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 1997 Oldsmobile Bravada, 1997 GMC Sonoma, 1997 GMC Savana, 1997 GMC Safari, and 1997 GMC Pickup. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BLOCK

Application In. (mm)
Cylinder Bore
Diameter 4.0007-4.0017 (101.618-101.643)
Maximum Taper (1) .0005 (.013)
Maximum Out-Of-Round (2) .001 (.03)
(1) Specification is for thrust side. Relief side is .001" (.03 mm).
(2) Production specification is given. Maximum service specification is .002" (.05 mm).
scientia non olet · About LEMON Manuals