LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1996 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Gasoline >> Testing >> Daytime Running Lights (DRL) >> Hi Beam Indicator Inoperative

Hi Beam Indicator Inoperative

  1. Disconnect instrument cluster printed circuit connector. Turn headlamp and panel dimmer switch to ON. Move headlamp dimmer switch to HI position. Connect a test lamp from instrument cluster printed circuit connector terminal "4" to battery positive terminal. If test lamp lights, go to next step. If test lamp does not light, service/repair open in Black/White wire between instrument cluster connector and ground.
  2. With instrument cluster printed circuit connector disconnected and headlamp and panel dimmer switch ON, move headlamp dimmer switch to HI. Connect a test lamp from instrument cluster printed circuit connector terminal "5" to ground. If test lamp does not light, service/repair open in Light Green wire between instrument cluster connector and splice. If test lamp lights, check for inoperative high beam indicator beam bulb. If okay, replace instrument cluster printed circuit.
scientia non olet · About LEMON Manuals