LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Yukon 4D Utility >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System & Drum Brake System - "C" & "K" Series >> Removal & Installation >> Linings (Rear Disc Brakes) >> Installation

Linings (Rear Disc Brakes): Installation

  1. Inboard lining and anti-rattle spring. Install outboard lining.
  2. Install caliper assembly.
    NOTE: Make sure the brake hose is not twisted or kinked after installation or damage to the hose could result.
    WARNING: Before moving the vehicle, pump the brake pedal several times to make sure it is firm. Do not move vehicle until a firm pedal is obtained. Check the brake fluid level in the master cylinder after pumping the brakes.
scientia non olet · About LEMON Manuals