LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Yukon 4D Utility >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System & Drum Brake System - "C" & "K" Series >> Removal & Installation >> Front Brake Rotor >> Installation ("K" Series)

Installation ("K" Series)

  1. Install hub and rotor assembly. Install hub and bearing retaining bolts and tighten to 133 ft. lbs. (180 N.m). Install axle shaft nut and tighten to 173 ft. lbs. (233 N.m). To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals