DTC 5 - Excessive Dump Valve ACTUATIONS During Anti-Lock Stop: Notes
WARNING: This page is about a different car, the 1995 GMC Sonoma. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform SYSTEM DIAGNOSTIC CHECK
before performing trouble shooting procedure.
- Turn ignition off. Check rear brakes and/or powertrain for locking condition. If rear brakes and/or powertrain are okay, replace Anti-Lock Pressure Valve (APV). See ANTI-LOCK PRESSURE VALVE . If rear brakes and/or powertrain are not okay, repair as necessary.
- Clear DTCs. See CLEARING CODES . Perform procedures under SYSTEM DIAGNOSTIC CHECK .