Intermittent Brake Light
WARNING: This page is about a different car, the 1995 GMC Sonoma. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform SYSTEM DIAGNOSTIC CHECK
before performing trouble shooting procedure.
- Turn ignition on. If BRAKE light comes on and stays on, go to BRAKE LIGHT ON . If BRAKE light does not come on, check for stored trouble codes. See RETRIEVING CODES . If Diagnostic Trouble Codes (DTCs) are present, go to next step. If no DTCs are present, go to BRAKE LIGHT ON step 5).
- If DTCs 5, 13, 14, or 15 are present, go to appropriate DTC under TROUBLE CODES . If DTCs 2, 3, 4, 6, 7, 8, 9, or 10 are present, go to appropriate DTC under TROUBLE CODES, then go to BRAKE LIGHT OFF under SYMPTOM DIAGNOSIS. This is due to a dual fault in the RWAL system.