LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Forward Control 4.3 Z, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Diagnosis - 4L80-E >> Electronic Self-Diagnostics >> Trouble Code Definitions

Trouble Code Definitions

NOTE: Only transmission-related trouble codes are listed. For engine-related DTCs, see appropriate TESTS W/CODES article in the ENGINE PERFORMANCE section. Engine-related DTCs must be repaired first, as engine performance and related component signals will affect transmission operation and diagnosis.
PCM/TCM TROUBLE CODE DEFINITIONS

Code No. Circuit Affected
12 (1) No RPM Reference Pulse
14 Coolant Temp. Sensor Signal Voltage Low
15 Coolant Temp. Sensor Signal Voltage High
21 TPS Signal Voltage High
22 TPS Signal Voltage Low
24 Vehicle Speed Sensor Trans. Output Signal
28 Trans. Range Pressure Switch
37/38 TCC Brake Switch On/Off
39 TCC Stuck Off
52/53 System Voltage High
58 Trans. Fluid Temp. High
59 Trans. Fluid Temp. Low
68 Transmission Component Slipping
69 Torque Converter Clutch Stuck On
72 VSS Circuit Loss Transmission Output Signal
73 Pressure Control Solenoid
74 Trans. Input Speed Error
75 System Voltage Low
79 Trans. Fluid Temp. High
81 2-3 Shift Solenoid Circuit Fault
82 1-2 Shift Solenoid Circuit Fault
83 TCC PWM Solenoid Circuit Fault
85 Undefined Gear Ratio
86 Low Gear Ratio Error
87 High Gear Ratio Error
(1) Display of a Code 12 is normal when no reference pulses are received by control module (engine not running).