LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Forward Control 4.3 Z, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Suspension - Rear - P Series Trucks >> Removal & Installation >> Stabilizer Shaft >> Removal

Stabilizer Shaft: Removal

  1. Raise and support vehicle
  2. Remove nuts (105), washers (106), bolts (111) and brackets (110). See Fig 1 .
  3. Remove stabilizer shaft (108) from the anchor plates.
  4. Remove nuts (105), washers (106), bolts (111) and the brackets (110).
  5. Remove insulators (109) from the stabilizer shaft (108).
Fig 1: Identifying Rear Stabilizer Shaft Attachments
G00132795Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals