LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Forward Control 4.3 Z, Standard >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column - P Series Van >> Removal & Installation >> Steering Wheel & Horn Pad (With Air Bag) >> Installation

Steering Wheel & Horn Pad (With Air Bag): Installation

  1. Ensure turn signal switch is in neutral position. Install and align steering wheel. DO NOT  misalign steering wheel. Install and tighten steering wheel retaining nut to 30 ft. lbs. (41 N.m). Install snap ring.
  2. Install horn contact, steering wheel inflator module connector and CPA clip. Install inflator module to steering wheel.
  3. Tighten screws to 27 INCH lbs. (3.1 N.m). To complete installation, reverse removal procedure. Check INFLATABLE RESTRAINT indicator light to ensure system is functioning properly. For more information, see the AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES & EQUIPMENT section.
scientia non olet · About LEMON Manuals