LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Forward Control 4.3 Z, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical 7.4L V8 - VIN [N] >> Removal & Installation >> Front Cover Oil Seal >> Installation

Front Cover Oil Seal: Installation

  1. Coat seal lip with engine oil. Using Seal Installer (J-22102), install NEW seal in front cover with seal lip facing engine. Apply RTV sealant to Woodruff keyway in crankshaft damper.
  2. Using Damper Puller/Installer (J-39046), install crankshaft damper. Install crankshaft damper bolt. Tighten to specification. See TORQUE SPECIFICATIONS . To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals