LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Forward Control 4.3 Z, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical 6.5L V8 Diesel - VIN [P] >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. If replacing camshaft bearings, see CAMSHAFT BEARINGS . Coat camshaft journals with engine oil and lobes with High Viscosity Oil/Zinc (12345501). Install camshaft. Install thrust spacer with inside chamfer toward camshaft. Install thrust plate.
  2. Ensure camshaft end play is within specification. See CAMSHAFT  table under ENGINE SPECIFICATIONS. Install camshaft sprocket and timing chain, ensuring timing marks are aligned. See Figure. To com plete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals