LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> Forward Control 4.3 Z, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches. >> Removal & Installation >> Steering Wheel & Horn Pad >> Removal

Steering Wheel & Horn Pad: Removal

Disconnect battery negative cable. Disable air bag (if equipped). See AIR BAG RESTRAINT SYSTEM article. Remove horn pad. Remove snap ring and steering wheel retaining nut. Disconnect horn lead assembly (if equipped). Mark steering wheel and shaft for reassembly reference. Using Steering Wheel Puller (J-1859-03), remove steering wheel.

NOTE: Turn signal switch must be in neutral position prior to installing steering wheel to prevent damage to canceling cam and switch assembly.
scientia non olet · About LEMON Manuals