LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1995 >> C3500 HD 6.5 F, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brake System & Drum Brake System - "C" & "K" Series >> Removal & Installation >> Rear Axle Hub Bearings & Oil Seal (Full-Floating Axle) >> Removal (11" Axle With Disc Brakes)

Removal (11" Axle With Disc Brakes)

  1. Remove rear hub and rotor assembly. under REMOVAL & INSTALLATION. Using a long drift and hammer, drive out inner bearing race, inner bearing and oil seal from outboard to inboard side of hub. .
  2. Remove retaining ring from inside of hub, inboard of outer bearing. Using Handle (J-8092) and Outer Bearing Race Remover/ Installer (J-24426), drive out outer bearing race from outboard to inboard side of hub.
scientia non olet · About LEMON Manuals