LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1993 >> Yukon Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front (4WD & AWD Torsion Bar) >> Removal & Installation >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

  1. Unload torsion bar tension. See Figure . Count exact number of tool turns for reassembly reference.
  2. To install, reverse removal procedure. Install NEW bushings on stabilizer bar. Ensure split in bushing faces toward front of vehicle. Tighten bolts and nuts to specification. See appropriate TORQUE SPECIFICATIONS  table at the end of this article. Lower vehicle. Check wheel alignment and adjust ride height. See SPECIFICATIONS & PROCEDURES article in WHEEL ALIGNMENT.
scientia non olet · About LEMON Manuals