LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1993 >> Forward Control 7.4 N >> Repair and Diagnosis (Single Page) >> Transmission >> Clutches >> Removal & Installation >> Clutch Assembly & Pilot Bearing >> Removal ("C" & "K" Series)

Removal ("C" & "K" Series)

  1. Remove transmission. See TRANSMISSION  under REMOVAL & INSTALLATION. Remove slave cylinder from bellhousing. See Figure . Remove bellhousing bolts and remove bellhousing.
  2. Remove flywheel cover bolts and remove flywheel cover. Remove clutch fork spring, seat, clutch fork and release bearing. Remove ball stud. Install Clutch Aligner (J-5824-01) to support clutch plate. Mark flywheel, clutch plate and pressure plate for reassembly reference.
  3. Evenly loosen pressure plate bolts 1-2 turns at a time until clutch plate spring tension is released. Remove clutch plate and pressure plate. Remove clutch aligner. Remove pilot bearing if worn or damaged using Pilot Bearing Puller (J-23907).
scientia non olet · About LEMON Manuals